Product Description

Why go home when it snows? Extend your adventure season and travel in comfort!

The Propex HeatSource HS2211 is a reliable propane furnace boasting 6500 BTU's of clean, dry, warm air. Maintaining a steady cabin temperature is easy with the included digital thermostat - simply set your desired temp and enjoy!

Propex HeatSource heaters separate the combustion circuit from the cabin so there is neither condensation nor risk of carbon monoxide entering the vehicle The result is clean, quiet, dependable heat in your vehicle.

The Propex HS2211 is a weatherproof, externally mounted unit perfect for campervans, trailers, tiny homes, semis, boats, even rooftop tents - anywhere you need reliable heat without taking up valuable cabin space.

Propex HS2211 External Gas Air Heater Features:

Mounted under the vehicle for maximum space savings
Frugal 1.7A current draw
Self-diagnostic onboard safety controls
Dependable integrated electronics
All installation hardware, ducting, wiring, and combustion pipes included
Three-year manufacturer's warranty from date of purchase
Fully supported in North America by Propex North America
Dimensions: L=430mm(16.93″) X W=230mm(9.06") X H=157mm(6.18")

This HS2211 heaters contains all the components for installation, including:

HS2211 Heater unit
1M 60mm water resistant ducting
1M 22mm water resistant combustion intake pipe
1M stainless steel combustion exhaust pipe
Digital thermostat
Complete wiring harness
Ducting vents for inside the cabin
Propane fittings to attach to your 1/4" copper supply tube
High temperature silicone connector for combustion pipe
Misc hardware, clamps, and fittings

Do I need the Propex high altitude model?

Much like when you climb a mountain, combustion heaters need to breathe a little harder at elevation. With the proprietary modifications we perform in-house, your Propex will run reliably at 9,000… 10,000… 11,000 feet, meaning you’ll have clean, dry heat when you need it most. If you plan to regularly camp at elevations higher than 7,500 feet (2286 meters), we recommend one of our altitude-modified heaters. Simply select the High Altitude model in the drop down above. The High Altitude model will also run great at sea level so its a win-win!

We now offer a five-year extended warranty for this Propex heater unit. Click here for terms and conditions.

Need even MORE heat output? Check out the 9500 BTU Propex HS2800

Please note: you'll also need a 1/4" - 1/4" compression fitting to install this heater onto your 1/4" tubing. Add yours by selecting the checkbox above. We have a great installation article located in the instruction tab!

HAVING RUNNING ISSUES WITH YOUR PROPEX HEATER? Reach out to our Technical Support Team.