Propex HS2000 Wall Mount Kit for Truck Toppers and Campers
Heat up your next adventure with our Propex HS2000 Wall Mounting Kit. We took our Propex HS2000 and turned it into a clean, wall-mounted heating system. Our HS2000 Wall Mount Kit is a new design from our team, built in house for truck toppers, camper shells, and any rig where you want your heater on the wall instead of the floor.
The kit places the combustion intake, exhaust, and propane connection outside in a low-profile, weather-resistant cover. Inside the cabin, your heater mounts flat to the exterior wall with warm air, power, and thermostat close at hand. No exhaust ever enters the cabin, so you get clean, dry, quiet heat all night long.
Why You'll Love the HS2000 Wall Mount Kit
- Exhaust stays outside: All intake and combustion parts live under the exterior cover, keeping fumes and moisture out of your living space.
- Low profile and quiet: The outer cover sticks out just 3.18" from the wall, and the heater runs whisper quiet, so it won't keep you up.
- Dry recirculated cabin heat: Forced air unit heater so no condensation produced by the heater.
- Fits most walls: Works with wall thicknesses from 1/8" up to 2".
- Easy layout: Comes with a drilling template, so placing and marking your holes is simple.
- Flexible power: Hardwire it to your 12V system, or plug into a portable power station.
- Set it and forget it: The HS2000 digital thermostat heats to your set temperature, shuts off, and kicks back on when the temperature drops about two degrees. It's efficient heat all night.
Who It's For
This kit is a great fit for truck topper and camper shell owners, overlanders, hunters, and anyone who wants permanent, wall-mounted Propex heat without giving up floor space. If you already own an HS2000, this kit lets you move it to the wall.
What's Included
- HS2000 (with high altitude modification)
- Low-profile, weather-resistant outer cover assembly
- Inner mounting cover
- Thermostat wiring harness
- Exhaust cap (used for storage or while driving)
See full Fitment Guide Sheet
See full Installation Instructions
What Else Should I Get?
Propane Supply
Depending on your specific propane set you can select one of the following options before you add to cart.
NOTE: Regardless of your propane set up you must have a high quality two-stage regulator set to 11.5 inches of water column in line from your propane tank to the heater.
Power Supply Cord
Since power banks and systems are specific to each build you can select one of the following options before you add to cart.
Don't have power?
We have you covered. We carry a small but powerful portable option that works excellent with this kit. You can select this options and add it to cart.
Specs and Fit
- Outer cover dimensions: 16.5" L x 3.18" W x 7.25" H
- Wall thickness: 1/8" minimum to 2" maximum
- Interior clearance needed: About 20" long x 9" tall of flat wall space to connect the ducting and propane line
- Mounting: 4 outer holes for the outer cover assembly and 4 inner holes for the outer mounting plate
- Part number: 9692
Before You Install
- Make sure you have about 20" x 9" of flat panel space inside the wall so you can still connect the ducting and propane line.
- Check that there's room outside for the 16.5" x 7.25" outer cover, and give the exhaust outlet plenty of clearance so it won't melt or damage anything nearby.
- Use the included drilling template to choose your spot and mark the holes you'll drill.
- OEMs and professional installers can request full mounting hole dimensions and CAD files. Just reach out.
Quick Setup Once Installed
- Connect your propane
- Connect your 12V power
- Set your temperature and enjoy the warmth
Compare Propex Heating Options
- Need more heat for a larger space? Check out the Propex HS2800 9,500 BTU heater.
- Want to save interior space? The Propex HS2211 mounts under the vehicle.
- No install at all? The PS2000 Slimline portable heater goes anywhere.
- Browse everything in our Propex heater collection.
Support From the Home of Propex North America
Questions about fit or installation? Do you already have an HS2000 and want to buy the components you need to mount it to a wall? Our team in Fort Collins, Colorado is happy to help. Call us at (970 578-0794) (Monday through Friday, 8 AM to 5 PM), email support@propexnorthamerica.com, or visit our Propex FAQ.
