1/4"Npt To 1/4" Npt Compression Coupler - Straight This 1/4"NPT to 1/4" NPT straight compression coupler can be used to splice sections of 1/4" copper tubing. It can also be used to adapt the gas outlet of Propex HS2211 models sold after May 2021 to 1/4" copper line. MSRP: Was: Now: $9.95 Add to Cart
Propex Omron Lead Z-771.119 HS2000 AFS Wire Loom three wire omron wiring harness with three small wires and white plugs. This seems to corode along with AFS. This is the shorter of the two AFS harnesses MSRP: Was: Now: $9.95 Add to Cart
Propex 22mm End Cap For Combustion Exhaust - HS2000 - HS2211 22mm End Cap for the combustion exhaust pipe in HS2000 and HS2211 heatersFits these two heaters only! Note: These end caps were originally crimped at the Propex factory with special tooling. If you are installing this item on a metal 22mm flue... MSRP: Was: Now: $8.95 Add to Cart
Propex Ducting Vent Outlet for HS2211 Due to its unique design, the Propex HS2211 heater uses a different ducting system than the other Propex heaters. These 65mm outlet vents screw directly into this straight connector. The 60mm weatherproof ducting is then inserted... MSRP: Was: Now: $7.95 Add to Cart
Propex Ducting Reducer for HS2800 Heater This 76mm ducting adapter is used to connect the 76mm ducting of the Propex HS2800 heater to the ducting outlet vents or junctions. Fitment notes: Slide the adapter into the vent or junction first Route your ducting Slide ducting over adapter as... MSRP: Was: Now: $5.95 Add to Cart
Propex Ducting Reducer for HS2000 & HS2211 This Propex 60mm adapter is used to connect the 60mm ducting of the Propex HS2000 heater to the outlet vent or ducting junction. Fitment notes: Slide the adapter into the vent or junction first Route your ducting Slide ducting over adapter as final... MSRP: Was: Now: $2.95 Add to Cart
