Propex 25.5mm-30mm High Temp Silicone Straight Connector for HS2800 MSRP: Was: Now: $17.95 Add to Cart
Propex 22mm Stainless Exhaust Combustion Pipe - HS2000 & HS2211 Propex 22mm ID stainless steel exhaust pipe with end cap suitable for the HS2000 and HS2211 heaters. You can also use this as a heavier duty intake pipe if you'd like to replace the standard paper/foil hose. One meter is 3.28 feet or 39.3 inches... MSRP: Was: Now: $24.95 Add to Cart
Propex 60mm Interior Ducting for HS2000 This Propex 60mm ducting matches the one meter supplied with a new HS2000 heater. If you are doing a custom installation and would like a greater length, this is the product for you. Sold in approximately one meter length.NOTE: For interior... MSRP: Was: Now: $22.95 Add to Cart
60mm APK Weather-Resistant Ducting For HS2000 or HS2211 This 60mm ducting for your Propex HS2000 or HS2211 heater is weather-resistant and can withstand a moist environment. Sold by the meter: Each quantity of one on your order will get you one meter/3.28 feet/39.3 inches. Use this in conjunction with... MSRP: Was: Now: $19.95 Add to Cart
Propex HS2800 Combustion Exhaust Insulation Sleeve Cool your jets with this combustion heat sleeve for the Propex HS2800! Under normal operation, the Propex heater combustion exhaust pipe doesn't get hot enough to cause a safety issue, especially if you avoid routing it around combustible material... MSRP: Was: Now: $19.95 Add to Cart
Propex HS2000 & HS2211 Combustion Exhaust Insulation Sleeve Cool your jets! Under normal operation, the Propex heater combustion exhaust pipe doesn't get hot enough to cause a safety issue, especially if you avoid routing it around combustible material. If you want EXTRA heat protection, we offer this... MSRP: Was: Now: $19.95 Add to Cart
Propex Open/Close Vent Customize your Propex heater installation by upgrading to this open/close vent to finish out your heat ducting. This vent also rotates to put the hot air exactly where you want it. Fitment notes: To attach this vent to the 60mm ducting for your... MSRP: Was: Now: $17.95 Add to Cart
Propex 22mm-25mm High Temp Silicone Straight Connector Propex 22mm-25mm silicone straight connector. High temperature silicone, this connector connects the combustion exhaust pipe to the Propex HS2000 and HS2211 heaters. Rated to 500F. Fitment notes: Use appropriately sized hose clamps (not included) on... MSRP: Was: Now: $17.95 Add to Cart
Propex 25.5mm-30mm High Temp Silicone Straight Connector for HS2800 Propex 25.5mm-30mm Straight ConnectorHigh temperature silicone, this connector connects the combustion exhaust pipe to the HS2800 heaters combustion outlet. Rated to 500F. Fitment notes: Use appropriately sized hose clamps (not included) on both side of... MSRP: Was: Now: $17.95 Add to Cart
Propex 22mm-25mm High Temp Silicone Elbow Connector This silicone 90-degree elbow is used to attach the combustion exhaust pipe to both the HS2000 and HS2211 heater models. The original connector is straight. This optional 90-degree bend allows for routing your combustion exhaust pipe with... MSRP: Was: Now: $17.95 Add to Cart
Propex 65mm Open/Close Vent - Beige 65mm open/close vent for Propex and Whale heater installations. Terminate your 60mm ducting by inserting into this vent. Beige in color. MSRP: Was: Now: $14.95 Add to Cart
Propex Ducting Y-Junction Are you imagining a custom installation of your Propex heater ducting? This Y-junction allows you to create a branch for a separate outlet to distribute your heater output. Fitment notes: Must be used in conjunction with either the 60mm adapter... MSRP: Was: Now: $13.95 Add to Cart
Propex Directional Vent This Propex directional vent is used with either 60mm (for HS2000) or 76mm (for HS2800) reducers to connect to the outlet ducting of the heater install. You would use this vent in the case that you want more than one vent in your installation. Use of a... MSRP: Was: Now: $13.95 Add to Cart
Propex 22mm APK Combustion Intake Pipe - HS2000 & HS2211 This 22mm APK combustion intake pipe comes with the Propex HS2000 and HS2211 heaters. If your intake pipe was damaged or needs replacing, this is the part you're looking for. Fits HS2000 and HS2211 heaters Weather-resistant One meter... MSRP: Was: Now: $12.95 Add to Cart
Propex Ducting Tee-Junction for HS2000 and HS2211 Heaters These tee-junctions screw directly into either the HS2211 outlet vents or accepts all 60mm ducting found in Propex HS2000 and HS2211 heater installations. Unlike the other vents and junctions in the Propex product line, this junction does NOT... MSRP: Was: Now: $12.95 Add to Cart
Propex Ducting Y-junction for HS2000 or HS2211 Heaters This Propex ducting Y-junction can be used to connect sections of 60mm ducting in installations of either the HS2000 or HS2211 heaters. The fitting measures 65mm in its inner diameter and the ducting simply slides into either end of the fitting. MSRP: Was: Now: $12.95 Add to Cart
Propex Ducting Junction (Straight) for HS2000 and HS2211 Heaters Due to its unique design, the Propex HS2211 uses a different ducting system than the other Propex heaters. This straight-through connector screws directly into these HS2211 outlet vents. The 60mm weather-resistant ducting is then... MSRP: Was: Now: $9.95 Add to Cart
Propex 26mm End Cap For HS2800 Combustion Pipes This 26mm end cap for the HS2800 heater combustion piping fits on the outboard end of the combustion piping Fits the HS2800 heater only. Note: These end caps were originally crimped at the Propex factory with special tooling. If you are installing... MSRP: Was: Now: $9.95 Add to Cart
Propex 22mm End Cap For Combustion Exhaust - HS2000 - HS2211 22mm End Cap for the combustion exhaust pipe in HS2000 and HS2211 heatersFits these two heaters only! Note: These end caps were originally crimped at the Propex factory with special tooling. If you are installing this item on a metal 22mm flue... MSRP: Was: Now: $8.95 Add to Cart
Propex Ducting Reducer for HS2800 Heater This 76mm ducting adapter is used to connect the 76mm ducting of the Propex HS2800 heater to the ducting outlet vents or junctions. Fitment notes: Slide the adapter into the vent or junction first Route your ducting Slide ducting over adapter as... MSRP: Was: Now: $3.95 Add to Cart
Propex Ducting Reducer for HS2000 & HS2211 This Propex 60mm adapter is used to connect the 60mm ducting of the Propex HS2000 heater to the outlet vent or ducting junction. Fitment notes: Slide the adapter into the vent or junction first Route your ducting Slide ducting over adapter as final... MSRP: Was: Now: $2.95 Add to Cart
